MF left hand side panels
MF left hand side panels,one is better than the other but both will paint up ok, 32” long at the bottom and 34.5” long at the top and 13.5” deep,, not sure what model but possibly 300 series?? £50 each no vat
MF 698 etc steering rams – pair
The ball joints on cylinder ends are reasonable but the ball joints on one ram end is damaged as pictured £100 the pair plus vat
Front linkage
Front linkage, off MF 390 4wd, C/W bolts, pipes, spacers etc, cat 2 hook ends, the links are bolted to the frame so could be adapted to suit other tractors, cheap set , sold
MF twin spool valve assy,
      MF twin spool valve assy, Kontak, two slices which are adjustable from double acting to single acting. Suit most tractors but have come out of 500 series. No levers, just what you see £100  
MF drawbar blade
  MF drawbar blade, 565/165 etc, thick but narrow type, 2” wide, 1,3/8” thick £100
MF puh locking hooks
    MF puh locking hooks, pair in good order, later type for rod type hitches part number looks like 1661-857-M3 £30 a pair
MF puh kit
  MF puh kit, heavy duty to suit 575/590/690 etc, think it’s a Drimone type? Very good and sone little work, £300
MF puh lift rods/arms
    MF puh lift rods/arms , 200/300/500/600 series pair L/H /R/H good order £100 the pair
MF rigid cab door
  MF rigid cab door, good sound door, 68.5” tall, 20.5” wide at the top, 29” wide in the middle & 16.75” wide at the bottom , all approx .   £150
MF 165 multi power
MF 165 multi power, 203 engine, power steering. Feb.1967 registered with current V5 Very straight tractor, good tin work, alloy grab handles, original alloy headlights, original cab heater in the battery box. Multi power is good, power steering really good, drive nice. Runs very well. £6500 no vat
Massey Ferguson 165
Massey Ferguson 165 with 203 engine, C reg, Nov.1965 with current V5 very good tin work, Alloy grab handles, very good 12.4 x 32 tyres, New front tyres runs very well, nice straight tractor. £6000 plus vat
MF Flexy cab doors
MF Flexy cab doors Pair of in pretty reasonable order Approx 28” wide in middle and approx 5’ tall Selling as a pair £500 no vat REFMF2858
MF 500 series Left hand door
MF 500 series left hand door Outer handle need replacing Top hinge broken but door is reasonable for a working tractor Not cracked in middle but some rot at the bottom and near handle SOLD
MF wide drawbar blade
MF wide drawbar blade Very good with little wear Suit 185/590/690? / 290 etc £100 no vat REFMF7098
MF pick up hitch hook
MF pick up hitch hook Original Suit  100/200/500 series and some 600 series Very good with little wear £70 no vat REFMF7491
MF 590 DOOR
MF   MF590 Door we have glass to suit sold
MF 698 etc drag link
MF 698 etc drag link 2 wd left to right Unused 39” long £100 plus vat REFMF396
MF 698 & possibly 595??
MF 698 & possibly 595?? Water pump to suit 318 engine Used but feels ok A while since it was taken off but been dry stored £100 plus vat REFMF563
Steering arm
MF 698 etc L/H steering arm with splines for top of king pin Very good condition £200 plus vat REFMF698A
MF Flexy cab door
MF Flexy cab door Right hand side Very good condition Approx 5’ high and 28” wide in centre £200 REFMF528
Cab rear window
Cab rear window, roll up type possibly Lambourn? MF/Ford/David Brown etc. 42” wide at the top, 47” wide at widest near bottom and 32” at the bottom Needs a clean but pretty good sold
MF 500 series front grille
MF 500 series front grille Original in sound condition Some very slight dents but pretty good 20” tall and 21” wide in the middle £50 REFMF564
MF Flexy cab side windows
MF Flexy cab side windows Used but in very good order 34” long at the top Approx 36” long at the bottom and approx 27” high Pair left and right sold
Flatford fold down roll bar
Flatford fold down roll bar to suit MF 35/135/230/240 Ferguson TE 20 Fordson Dexta, 2000 , 3000 etc Good order SOLD
MF 575/590/595 ?
MF 575/590/595 ?? Four wheel drive prop shaft 6 spline each end, 46.5” long Centre bearing is seized £150 plus vat
MF 595 mk 2
MF 595 mk 2, choice of 2 for restoration, one is multi power and one is12 speed 3 lever with 2 door cab sold
MF 300 series weight frame
MF 300 series weight frame Original frame which has been extended, could easily be made back standard if required. sold
MF 390T engine
MF 390T engine Complete with flywheel, clutch, starter, exhaust etc. Done approx 4500 hours and in very good condition SOLD