JCB auxiliary boom Pipes
  JCB auxiliary boom Pipes, part numbers 409/M9466 & 400/M9403 , as new old stock £100 plus vat
Jcb small loadall seat
  Jcb small loadall seat with seat belt, bit of wear/damage as pictured, still do a job, £120 plus vat
JCB Fastrack light bracket
  JCB Fastrack light bracket, slight bend on mounting plate but easy to repair, £40 plus vat (not sure if left or right)
JCB loadall forks
  JCB loadall forks, 1060 mm long, 50 mm bar hole, unused pair £500 plus vat
Volvo carriage
    Volvo carriage to suit JCB TM 310/320 etc, hydraulic locking, used , £1200 plus vat
JCB Fastrack fan
  JCB Fastrack fan, part number 30/926118 , new shop soiled £70 plus vat
JCB 525-60 inner and outer boom
JCB 525-60 inner and outer boom with pipes , crowd ram (no boom extension ram) near new off prototype development machine, will split for parts
JCB 18”
JCB 18” (460 mm ) bucket with 65 mm pins to suit 12/13/14 tonne machines, part number 980/A0401 , new unused with 3 x teeth and cutting edge , very strong buckets , £900 each plus vat
JCB long pallet forks
JCB long pallet forks, 1524 mm long x 125 wide x 50 deep, suit 57 mm bar like in 541 etc , new unused, £600 the pair plus vat
JCB 526 inner boom
JCB 526 inner boom, new unused. New style (flat front type) but should replace older rounded front type ? £1500 plus VAT
JCB 525-60 Q Fit carriage
      JCB 525-60 Q Fit carriage, part number 333/H7622 2015 but taken off when nearly new and stood since so paint not perfect and a little rust but virtually no wear at all. Bare carriage, no locking pins/lever etc £800 plus vat
Pin and cone pallet forks
Pin and cone pallet forks, 4700kg, JCB ex demo, part number 335/B0238 1200 mm long forks, 1200 wide carriage. sold
JCB loadall pick up hitch
    JCB loadall pick up hitch to suit 530/70, 531/70, 541/70, 535/95 etc. Used hitch as pictured with ram, slight bend on hook but very small. £500 plus vat
JcB 4 in 1 bucket
JcB 4 in 1 bucket , new unused, 6’ wide (1850 mm) Suit 2cx and others ? Part number 141/67000 Would convert to suit many machines. £1850 plus vat
JCB loading shovel tip and crowd arms
          JCB loading shovel tip and crowd arms, (2sets?) centre arm with side plates, 75 mm pin size, approx 640 mm pin centres on the centre arm end to end, 220 mm end hole to centre pin one side and 420 mm other side, The side arms are 710 pin centres end to end, 265 pin centres end pin
JCB Pin and cone pallet forks
  Pin and cone pallet forks , JCB made, 1060 mm wide carriage, forks are approx  1180 long and 120 wide, very good ex demo set SOLD
JCB TM 320/420 boom lift ram
  JCB TM 320/420 boom lift ram, (SRS) part number 563/60200, £1200 plus vat Also boom extension ram part number 567/60247 for tm 320 / 420 £800 plus vat
Jcb loadall pick up hitch
Jcb loadall pick up hitch to suit 530/70/531/70/541/70/535/95 etc. Just the hitch as pictured, £800 plus vat
JCB Q-fit pallet forks
  JCB Q-fit pallet forks Heavy duty Q-fit pallet forks C/W side shift £1250 plus vat
New unused JCB 6’ grader bucket
  New unused JCB 6’ grader bucket, part number 980/C0009 65 mm pins to suit most make of 13/14 tonne machines, boom width 285 mm, pin centres 385 mm Approx 900 mm deep, heavy duty with bolt on reversible edge. £1500 plus vat
JCB loadall seat
JCB loadall seat, unused shop soiled , manual adjustment, one headrest bung missing as pictured. Cloth trim, suit 530/531 etc £400 plus vat
JCB Multi-shovel
JCB Multi-shovel 7ft 7” wide , Q-Fit brackets , bolt-on toe plate, no leaks. sold
JCB 1.0mtr cube bucket
JCB 1.0mtr cube bucket One cube bucket 7ft 6” wide Q-fit brackets C/w bolt-on reversible edge Original JCB supplied £1100 ea plus vat
JCB skid steer headstock to suit 524/50
JCB skid steer headstock to suit 524/50 527/55 loadall and some robot /skid steers 160, 180 etc JCB part numbers 333/C9398 or old number 296/02080 Pivot pin is 50 x 500 mm Tip pin is 40 x 190 As new old stock taken off a new machine and been stood a while. £2000 plus vat
JCB 532-60 Agri Telehandler
JCB 532-60 Agri Telehandler One owner 2591hrs 2021yr build on a 22 reg 40kph torque lock A/C LED work lights 70% Michelin 460/70×24 tyres Q-fit hydraulic locking carriage(could be swapped at cost to suite other carriages) Rear hydraulic hitch , 1 x double acting spool , trailer brakes , New style cab. SOLD
JCB TM320S
Advertised on behalf owner please call 01535 655229 or 07875151806   JCB TM320S 2018 REG The machine was fully serviced in March 2023 with 4520 hours on the clock. this was a complete service including all the hub end oils/diffs etc and a brand new jcb battery. The hours on the machine now 05/06/2023 are 4586 The tyres are Michelin Bib load hard
Pin and cone pallet forks
Pin and cone pallet forks, Cat 3 , 4500 kg, 1200 mm wide carriage with 1070 mm long forks JCB made Very good and done very little work sold
JCB SPECIAL HP GREASE
  JCB Special HP Grease is a premium quality extreme pressure grease,recommended for use in arduous operating conditions, such as high temperatures, excessive loading and extensive exposure to water. The sophisticated additive package combines with excellent adhesive properties to give high performance protection to hard working automotive, industrial, agricultural and earthmoving equipment, all year round. 24x 400g £75 Plus Vat
JCB 540-170 Telehandler 2017yr
JCB 540-170 Telehandler 2017yr 17mtr Loadall 4072hrs Front work lights Side shift forks Chassis sway, 25” wheels V5 available Serviced & ready to go £43,750 plus vat REF540170
JCB air seat
JCB air seat, part number 332/K6199 (original KAB 700 series seats) Heated air seat with arm rests to suit JS type diggers etc. Would suit many applications, loadall, loaders etc Arm rests can be removed if required. 24 volt but we can supply a 12-24 volt converter. £325 plus vat